Ring die pellet mill
The Ring die pellet mill machine belongs to the feed granulation equipment. It is a feed processing machine that directly compresses particles by crushing materials such as corn, soybean meal, straw, grass, and rice husk. The ring mold granulator is the main feed machinery for the production of pellet feed. Its performance determines the feed processing output to a large extent and plays a very important role in the feed processing.
It is widely used in large, medium and small aquaculture, grain and feed processing plants, livestock farms, poultry farms, individual farmers and small and medium-sized farms, farmers or large, medium and small feed processing plants.Main performance characteristics
1. Simple structure, wide adaptability, small floor space and low noise.
2. The powdery feed and grass powder can be granulated without adding a little liquid, so the water content of the pellet feed is basically the moisture content of the material before granulation, which is more conducive to storage.
3. Chickens, ducks, fish, etc., can obtain higher economic benefits than mixed powdered feed.
4. Dry material processing, the production of feed pellets with high hardness, smooth surface and internal ripening can improve the digestion and absorption of nutrients.
5. The particle formation process can denature the pancreatic enzyme resistance factor in grains and beans, reduce the adverse effects on digestion, kill various parasite eggs and other pathogenic microorganisms, and reduce various insect and digestive diseases. .Feeding method
The ring die granule machine adopts mechanical forced feeding, high-speed rotary centrifugal distribution into the granulating chamber, distributes the material through the scraper, and the feeding is uneven; the flat granulator enters the pressing chamber vertically by the weight of the material itself, and can be evenly fed. .pressure
In the mold of the same diameter, the diameter of the ring die is limited by the diameter of the ring die, so the pressure is limited; the diameter of the flat die is not limited by the diameter of the die, which can increase the space of the inner bearing. The bearing capacity of the bearing enhancer not only increases the pressing force of the pressure roller, but also prolongs the service life.Discharge method
The ring mold belongs to a high speed, and the breakage rate is high when the material is discharged; the flat mold belongs to a low speed and the breakage rate is low.Pressure roller adjustment
If the ring die granulator uses two screws on the eccentric wheel in the middle of the pressure wheel to adjust the pressure; the flat die granulator adopts the thread screw column m100 center adjustment mechanism, the top force is 100 tons, the drop is smooth, the touch is soft, the pressure is Evenly. Rotary manual and hydraulic automatic adjustment can be used.
From the comparison between the flat die and the ring die, we can see that the flat die has a larger pressure than the ring die, so it is lighter for materials such as wood chips and straw, and it is better to use a flat die for the coarse fiber which is difficult to form.
PRE:Flat die pellet making machine
NEXT:Dry type fish feed extruder